(801) 407-9320
Pressure Reducing Valve (PRV)
Plumbing Service — Utah

Pressure Reducing Valve (PRV)

Protect Your Plumbing from High Municipal Pressure

Serving Utah County, Salt Lake County, Davis County, Wasatch & Summit County

4.9 Rating Licensed & Insured Same-Day Available Master Plumber
Pressure Reducing Valve (PRV) in Utah

500+ Reviews

Utah's municipal water systems often deliver water at 80-120 PSI — far higher than your home's plumbing is designed for. A Pressure Reducing Valve (PRV) automatically reduces incoming pressure to a safe 50-75 PSI. Without one, high pressure causes leaks, burst pipes, failed water heater relief valves, and premature failure of washers, dishwashers, and other appliances.

The Details

What You Need to Know

A PRV is a valve installed at your main water line that automatically regulates pressure. As high-pressure water enters the valve, an internal piston moves to create resistance, reducing the pressure on the downstream side. The valve maintains consistent pressure even as municipal supply pressure fluctuates throughout the day.

Water pressure above 80 PSI is considered too high. In Utah, many homes experience 90-110 PSI. At these levels, you'll hear banging pipes (water hammer), see pinhole leaks in copper pipes, find your water heater's relief valve dripping constantly, and experience fixture failures. Installing a PRV is the single most important protection against pressure-related plumbing damage.

PRVs require maintenance. Over time, mineral buildup and debris can get stuck in the valve, causing it to stick open or closed. A faulty PRV either allows too much pressure through (defeating its purpose) or restricts flow (reducing water delivery to your home). We service and replace PRVs as part of routine plumbing maintenance.

Pressure Reducing Valve (PRV) product

How It Works

Our Pressure Reducing Valve (PRV) Process

Measure your incoming water pressure at the main line. If it's above 80 PSI, a P…

Measure your incoming water pressure at the main line. If it's above 80 PSI, a PRV is needed.

Choose the right PRV size (1-2 inches typically) and install at the main shutoff…

Choose the right PRV size (1-2 inches typically) and install at the main shutoff. Most homes need a 1-inch unit for residential service.

Adjust the PRV to deliver 50-75 PSI and verify pressure throughout your home is …

Adjust the PRV to deliver 50-75 PSI and verify pressure throughout your home is now regulated.

We recommend annual inspection to ensure the PRV is functioning and not stuck or…

We recommend annual inspection to ensure the PRV is functioning and not stuck or leaking.

PRVs typically last 5-10 years. We replace them before failure to avoid damage t…

PRVs typically last 5-10 years. We replace them before failure to avoid damage to your plumbing.

Real Results in Utah Homes

Our Work

Pressure Reducing Valve (PRV) installation 1
Pressure Reducing Valve (PRV) installation 2
Pressure Reducing Valve (PRV) installation 3

Ready to get started?

Free estimates · No hidden fees · Same-day available across Utah

The AYSP Difference

Why Utah Homeowners Choose Us

Prevent Burst Pipes

High pressure causes pinhole leaks and splits in copper and PEX. A PRV keeps pressure in the safe zone.

Protect Your Water Heater

Water heaters are pressured-tested to about 150 PSI. Overpressure voids warranties and causes relief valve failure.

Reduce Appliance Failure

Washing machines, dishwashers, and ice makers all fail faster under high pressure. A PRV extends appliance life by years.

Stop Water Hammer

That banging sound when you turn off a faucet is water hammer — a sign of excessive pressure. A PRV eliminates it.

Utah Code Requirement

Utah's Uniform Plumbing Code requires a PRV when municipal pressure exceeds 80 PSI. We ensure code compliance.

Local Service

Pressure Reducing Valve (PRV) Across Utah

We provide pressure reducing valve (prv) services to homeowners across the Wasatch Front and surrounding areas. Same-day service available in most locations.

Got Questions?

Pressure Reducing Valve (PRV) FAQ

?How do I know if my water pressure is too high?
Take a shower and listen for banging pipes when you turn off the faucet. Check if your water heater relief valve drips when you're not using water. Both are signs of overpressure. We can test your exact pressure with a gauge.
?What's the difference between a PRV and a pressure relief valve?
A PRV (Pressure Reducing Valve) is installed at the main and continuously regulates pressure going into your home. A relief valve is a safety device on appliances like water heaters that opens only if pressure gets dangerously high. You need both.
?How much does a PRV installation cost?
A standard PRV installation typically costs $300-$600. This includes the valve, installation, pressure testing, and initial adjustment. Annual maintenance is about $50-$75.
?Why is my water pressure so high in Utah?
Utah municipalities deliver water at high pressure because many homes are at higher elevation and spread across larger service areas. 80-110 PSI is common on the Wasatch Front.
?Can I install a PRV myself?
While possible, PRV installation requires pressure testing, proper sizing, and calibration. Incorrect installation can restrict water flow or fail to reduce pressure. Professional installation is recommended and costs less than the damage improper installation causes.
Pressure Reducing Valve (PRV)

Get your water pressure tested — a PRV could save thousands in plumbing damage

Serving homeowners across Utah County, Salt Lake County, Davis County, and beyond. Schedule a service call or explore our free guide to learn more.