Furnace Replacement in Utah: Cost Drivers and What's Included in Cedar Hills, Utah
What actually affects pricing for furnace replacement in utah: cost drivers and what's included in Cedar Hills, plus available rebates and what's included in our written, fixed-price quote.
Quick answer
Furnace Replacement in Utah: Cost Drivers and What's Included in Cedar Hills, Utah — pricing depends on afue efficiency rating and btu output (size). At Your Service Pros provides free in-home estimates across Cedar Hills and Utah County, with a $79 HVAC diagnostic (waived on approved repair) on repair-side visits. You see a written, fixed-price quote before any work begins. Licensed and insured in Utah; 436+ verified Google + Yelp reviews. Call (801) 407-9320 or book online.
What affects furnace replacement in utah: cost drivers and what's included pricing in Cedar Hills
AFUE efficiency rating
80% AFUE = standard, lower upfront cost. 96%+ AFUE = high-efficiency, ~15–20% lower gas bills, qualifies for IRA credit + utility rebates. Math usually favors 96%+ for homes that run heat 5+ months/year.
BTU output (size)
Sized via Manual J. Utah elevation requires altitude derating: a 100,000 BTU rated furnace at sea level outputs about 90,000 BTU at 4,500 ft. Most Utah homes need 60,000–100,000 BTU.
Vent type
80% AFUE uses metal B-vent (existing chimney usually works). 96%+ AFUE uses 2-pipe PVC sidewall vent (we run new pipe through the wall). Switching from metal to PVC adds labor.
Variable-speed vs. single-stage blower
Variable-speed ECM blower runs quieter, dehumidifies better when paired with AC, and reduces electrical consumption. Worth it for new builds and homes with multi-zone setups.
Existing duct + plenum condition
If the existing supply/return plenum is undersized, rusted, or mis-sized for the new BTU output, we modify or replace as part of the install.
What's included in our Cedar Hills quote
- Manual J load calculation
- Gas furnace (80% or 96%+ AFUE) sized correctly
- New flue / vent (PVC for 96%+, metal for 80%)
- Combustion analysis at startup
- Gas line connection + leak test
- Condensate drain (96%+ furnaces only)
- Permit + inspection
- 10-year parts warranty
- 1-year labor warranty
Sometimes extra (we always flag this upfront)
- — AC replacement (if pairing for a matched system, see /cost/full-system-replacement)
- — Ductwork rework if existing ducts are undersized
- — Gas line upsize (rare — only if BTU jumps significantly)
- — Chimney liner if switching from atmospheric to direct vent
Cedar Hills rebates & tax credits
IRA Section 25C federal tax credit
96%+ AFUE ENERGY STAR furnace
Federal tax credit on your annual return for high-efficiency furnaces.
Rocky Mountain Power Wattsmart
Tier-1 / Tier-2 high-efficiency
Utility rebate for upgrading to a high-efficiency furnace.
Enbridge Gas Utah efficiency rebate
Gas furnace 96%+ AFUE
Gas-utility rebate for high-efficiency furnaces — separate from RMP.
Furnace Replacement in Utah: Cost Drivers and What's Included FAQ — Cedar Hills edition
Do you serve Cedar Hills for furnace replacement in utah: cost drivers and what's included?
Yes — Cedar Hills is well inside our standard service area. We dispatch same-day across Utah County with a typical 2-hour arrival window on weekday calls.
Is the in-home estimate free in Cedar Hills?
Yes — free in-home estimates on all replacements and new installs. For repairs, $79 HVAC diagnostic (waived on approved repair). You see a written, fixed-price quote before any work begins.
Should I replace my furnace with another furnace, or switch to a heat pump?
Depends on your gas vs. electric rate, climate exposure, and whether you have ductwork. Most Utah homes still benefit from a dual-fuel setup (heat pump + gas furnace backup) over heat-pump-only because nighttime winter temps below 5°F are common and gas heat is reliable + cheap. We model the math on every quote.
Do I need to upsize my gas line for a new furnace?
Almost never. Most existing 1/2" or 3/4" black-iron gas lines can handle a 100K BTU furnace if the run length is reasonable. We size and pressure-test on every install.
What's the difference between 80% and 96% AFUE?
An 80% AFUE furnace converts 80 cents of every dollar of gas to heat (20 cents goes up the flue). A 96% model converts 96 cents. Over 15 years, the savings typically exceed the higher upfront cost — and the 96% qualifies for tax credits and utility rebates that the 80% does not.
Get a real Cedar Hills number for furnace replacement in utah: cost drivers and what's included
We don't list dollar prices on cost pages because every home is different. Get a free in-home estimate with a written, fixed-price quote — same-day available across Utah County.