Furnace Installation in Midway, Utah
Free in-home estimate · Family-owned · Licensed & insured · 10+ years serving Utah
What homeowners in Midway should know about furnace installation
New furnace installs in Midway need three things most contractors skip: a real Manual J load calc that accounts for the 5,580 ft elevation, a combustion analysis at commissioning to verify the burner is running clean, and correct venting for 96% AFUE condensing models. The wrong-sized furnace is the single most common comfort problem we fix in Midway homes — oversized units short-cycle and leave cold spots, undersized units run flat-out on January nights and still don't keep up. We size every install to the actual heat load with derating built in, install per IFGC and IRC code, and verify with a combustion analyzer before we leave.
Why Midway homeowners pick us for furnace installation
Manual J load calc + elevation derate built into every quote - no builder-spec "tonnage by square footage" guessing
Combustion analyzer verification at commissioning - we measure CO, O2, and stack temp to confirm clean burn
10-year parts warranty (industry-leading) plus our written workmanship guarantee
Furnace Installation FAQ — Midway edition
How much does a new furnace cost installed in Midway?
Most Midway furnace installs run $4,500-$12,500. Big variables: efficiency (80% AFUE non-condensing $4,500-$6,500, 96% AFUE condensing $6,500-$9,500, modulating/variable-speed $9,500-$12,500), size (60K BTU vs 100K BTU), and venting work for 96% units (PVC sidewall vent install adds $400-$900).
Should I go 80% or 96% AFUE for my Midway home?
For most Midway homes the 96% AFUE upgrade pays back in 8-11 years on gas savings — usually worth it if you're staying 10+ years. The 80% AFUE non-condensing units last longer (no acidic condensate corroding the heat exchanger), so for short-term stays or rental properties they can be the better long-term call. We'll show both quotes side-by-side at the estimate.
Does Midway's 5,580 ft elevation affect furnace sizing?
Yes — high-altitude derating cuts furnace output about 4% per 1,000 ft above sea level. At 5,580 ft, a "100,000 BTU" furnace actually delivers around 78K BTU of usable heat. We factor this into every Manual J — it's why undersized furnaces are so common when builders use sea-level spec sheets.
Do you install all major furnace brands in Midway?
Yes — Trane, Carrier, Bryant, Lennox, Goodman, Rheem, American Standard, York, and others. We don't favor any single brand; we'll recommend based on your duct system, efficiency goals, and budget. AHRI match certification done on every install for warranty + rebate eligibility.
How long does furnace installation take in Midway?
Standard same-spot swap: one day, 6-8 hours. Adding a high-efficiency 96% AFUE where you previously had 80% (requires new sidewall venting): 1-1.5 days. Full HVAC retrofit with new ducts: 2-3 days. We give a firm timeline at the in-home estimate.
Furnace Installation in nearby Wasatch County cities
Other services we offer in Midway
Ready for your free Midway estimate?
We come to your home, do a real assessment, and give you a written, fixed-price quote — no obligation, no high-pressure sales.