(801) 407-9320
Electrical, home charging

Utah EV Charger Buyer Guide

How to choose a home charger in Utah: the types, the circuit and panel it needs, the permit, and which incentives are real this year.

Most of the work of installing an EV charger is not the charger. It is the circuit behind it. A Level 2 charger is a continuous 240 volt load that runs for hours, and the panel, the wire and the breaker all have to be sized for that. Get that part right and almost any good charger will serve you for a decade.

This guide is for homeowners in Utah, Salt Lake, Davis, Wasatch and Summit counties and the Tooele Valley. It explains the choices in the order you face them.

Level 1, Level 2 and fast charging

Level 1 plugs into a regular 120 volt outlet and adds roughly 4 or 5 miles of range per hour, which suits a short daily commute and a plug-in hybrid. Level 2 uses a 240 volt circuit and adds about 25 to 40 miles per hour depending on the amps, which is why most owners install one at home. DC fast charging needs equipment that is not installed in homes. If you drive 40 miles a day, a Level 2 charger refills the battery in a couple of hours overnight.

Matching the charger to the circuit

A 48 amp charger is faster only if the car can accept 48 amps. Many cars accept 32 or 40, and a bigger charger just costs more and needs heavier wire. We check your car's onboard charger limit before we choose.

Charger outputBreaker and wireApproximate range per hour
Level 1, 12 amps at 120 voltsExisting 15 or 20 amp outlet4 to 5 miles
32 amps at 240 volts40 amp breakerAbout 25 miles
40 amps at 240 volts50 amp breakerAbout 33 miles
48 amps at 240 volts60 amp breakerAbout 40 miles

A charging load is continuous, so the National Electrical Code sizes the circuit at 125 percent of the charger's amps. Range per hour varies with the car.

Panel capacity and load calculation

The question to ask is whether the panel can carry the new load, not whether it has an open slot. We run a load calculation on the existing service, add the charger's continuous load and see what is left. A 200 amp panel usually has room. A 100 amp panel in an older home often does not, and the choices are a panel or service upgrade, or an energy management device that limits the charger when the rest of the house is busy. The code allows load management, and it is often the cheaper way to avoid a service upgrade.

Plug-in or hardwired, and where to mount it

  • Plug-in: a 14-50 receptacle with a plug-in charger. Easy to swap later. Outdoor receptacles need GFCI protection and a weather-rated cover.
  • Hardwired: no receptacle to wear out, can run at higher amps, and the preferred choice for outdoor mounting.
  • Cable length: a longer cable lets you park either way and still reach the port.
  • Connector: many newer cars use the North American Charging Standard port, and most older cars use J1772. Chargers and adapters cover both.
  • Cold weather: a cold battery charges slower, so a garage mount makes winter charging faster and keeps the cable off the snow.

Permits

A charger circuit is permitted electrical work. Orem, for example, lists electrical work among the work needing a permit, and its monthly permit reports show EV charger permits. We apply for the permit and schedule the inspection for you. An unpermitted circuit can complicate a home sale or an insurance claim.

Rebates and credits in Utah, as of November 2026

  • Federal home charger credit (IRS section 30C): it applies only to chargers placed in service on or before June 30, 2026. A charger installed now does not qualify.
  • Rocky Mountain Power: its residential program is Wattsmart Drive, a bill credit for letting the utility manage your charging. We found no residential home charger rebate in its current Utah incentive schedule. Confirm with the utility before you rely on one.
  • City utilities: Provo City Power lists an optional EV time-of-use rate, and Lehi runs its own power department. Check your own utility.
  • A blog post or ad that promises a rebate without a date is probably out of date.

Get an EV charger estimate

Choose a time on our online schedule. We look at the panel, the car and the garage, then give you the flat-rate price on site.

Book an EV charger estimate

Frequently asked questions

Do I need a permit to install a home EV charger in Utah?

Yes. A new 240 volt circuit is permitted electrical work and is inspected. We pull the permit and schedule the inspection.

Can my 100 amp panel support a Level 2 charger?

Sometimes. It depends on your existing load. We calculate it and, if capacity is short, we suggest a service upgrade or a load management device.

Is there a federal tax credit for a home charger now?

No new ones. The section 30C credit ended for equipment placed in service after June 30, 2026.

Does Rocky Mountain Power pay a rebate for home chargers?

We could not find a current residential charger rebate. Its Wattsmart Drive program gives bill credits for managed charging. Check the utility's page before you buy.

Plug-in or hardwired?

Hardwired is the cleaner choice outdoors and at higher amps. A 14-50 plug is easy to swap. Either works when the circuit is right.

What does an estimate cost?

The in-home estimate is free, and you get the flat-rate price in writing before any work starts.

Where we work

We serve Utah, Salt Lake, Davis, Wasatch and Summit counties, plus the Tooele Valley, with the same licensed technicians and the same flat-rate price given on site before any work starts.

Related services

EV charger installation by city

Public sources used on this page