(801) 407-9320
Pleasant Grove, Utah County · ZIP 84062

Tankless Water Heater Installation in Pleasant Grove, Utah

Free in-home estimate · Family-owned · Licensed & insured · 10+ years serving Utah

$3,800–$7,500 typical
1 day
Licensed & insured

What homeowners in Pleasant Grove should know about tankless water heater

Tankless water heaters in Pleasant Grove solve the two biggest complaints about traditional tank water heaters: running out of hot water mid-shower (especially the 50-gallon tank in a 5-person Pleasant Grove household) and watching utility bills slowly drain off keeping 50 gallons of water hot 24/7 even when you're at work. Tankless heats on demand, lasts 20+ years vs 8-12 for a tank, and our Pleasant Grove's 22+ grain hard water means tankless owners benefit even more (no tank scale = no premature failure). But the install has more gotchas than most contractors warn you about: gas line may need upsizing from 3/4" to 1", venting needs PVC sidewall (not B-vent), and a softener loop becomes nearly mandatory at Pleasant Grove's hardness levels to keep the heat exchanger from scaling shut.

Why Pleasant Grove homeowners pick us for tankless water heater

Endless hot water - no more racing the kids for showers, no more cold rinse at the end of a dishwasher cycle

20+ year service life vs 8-12 for tank heaters in ${city}'s hard water - especially with paired softener loop

Gas line sizing, venting, condensate drain, and softener loop handled in the quote - no day-of surprises

Tankless Water Heater FAQ — Pleasant Grove edition

How much does a tankless water heater cost installed in Pleasant Grove?

Most Pleasant Grove tankless installs run $3,800-$7,500 including gas line upsizing (if needed), PVC sidewall venting, condensate drain, electrical, and pulled permits. Variables: brand (Rinnai/Navien/Rheem $400-$900 spread), whether existing gas line is 3/4" needing upsize to 1" (+$650-$1,100), and whether you're adding a softener loop on the inlet (+$800-$1,400).

Will a tankless work for a large family in Pleasant Grove?

Yes — sized right. The right unit for a 4-5 person Pleasant Grove household running 2 simultaneous fixtures (shower + dishwasher) is a 199K BTU non-condensing or 180K BTU condensing model. Larger households or homes with body-spray showers need a 199K condensing OR a tankless + small storage tank combo. We size based on peak flow rate in GPM and Pleasant Grove's incoming water temp (40-45 degrees F in winter).

Do tankless heaters work well with Utah hard water in Pleasant Grove?

Only with proper maintenance. Pleasant Grove water at 22 grains/gallon will scale up a tankless heat exchanger and kill it in 4-6 years if you don't either (a) install a softener loop ahead of the heater, or (b) schedule annual descaling. We strongly recommend softener loop installs on every Pleasant Grove tankless — adds $800-$1,400 to the install but extends the heater life from 8 years to 20+.

How long does tankless installation take in Pleasant Grove?

Standard install replacing an existing tank: 1 day, 6-9 hours. New install with gas line upsize from 3/4" to 1": 1.5 days. Conversion from electric tank to gas tankless: 1.5-2 days (new gas line run, venting). Permit pull and inspection adds a couple days to the overall calendar but doesn't extend on-site time.

What maintenance does a tankless need in Pleasant Grove?

With a softener loop installed: annual flush/descale (we include in Service Partner Plan), inlet filter screen clean, condensate trap clean. Without softener: same plus 2x/year descaling minimum to avoid scale buildup. Either way: $99 flat-rate tune-up via our maintenance plan (the tankless-specific Service Partner tier is $169/visit).

Ready for your free Pleasant Grove estimate?

We come to your home, do a real assessment, and give you a written, fixed-price quote — no obligation, no high-pressure sales.