Gas Line Installation & Repair in Cedar Hills, Utah
Free in-home estimate · Family-owned · Licensed & insured · 10+ years serving Utah
What homeowners in Cedar Hills should know about gas line service
Gas line work in Cedar Hills is licensed-plumber work for a reason — a slow leak in a fitting can fill a confined space and create a real explosion risk. Most calls we get fall into four buckets: extending an existing line for a new gas appliance (range, dryer, fireplace, BBQ stub-out, generator), repairing a flex line that's developed a leak, upsizing the main from 3/4" to 1" because the new tankless or new generator can't pull enough fuel through the old line, or chasing a "I smell gas" call (those get priority dispatch). Every gas line job in Cedar Hills gets pressure-tested at 1.5x operating pressure for 15+ minutes before we leave, and we pull the required Cedar Hills/county permits for any new line installation.
Why Cedar Hills homeowners pick us for gas line service
Licensed Utah plumbers handling every gas line job - this is not DIY territory and not the work for an unlicensed handyman
Pressure-tested at 1.5x operating pressure for 15+ minutes on every job - we don't leave until the line holds
Permits pulled for all new line installs - ${city}/county inspector signoff is part of the price
Gas Line Service FAQ — Cedar Hills edition
How much does gas line work cost in Cedar Hills?
Common Cedar Hills gas jobs: new line run for a range or dryer (short distance, no upsizing) $280-$550, gas BBQ stub-out at the patio $325-$650, fireplace line extension $480-$850, upsizing the main from 3/4" to 1" for a tankless or generator $850-$1,400, generator line + connection $1,200-$2,400. Flat-rate quotes with permits included.
I smell gas in my Cedar Hills home - what should I do?
Get out of the house first. Then from outside, call Dominion Energy (1-800-323-5517) immediately - they dispatch free emergency response 24/7 to find the leak. Once they've shut the gas at the meter and identified roughly where the leak is, call us to repair. Do NOT call us first - the utility dispatch is faster for the safety shutoff and they don't charge.
Can you install a gas line for an outdoor BBQ at my Cedar Hills home?
Yes - one of the most popular Cedar Hills gas jobs. We tap the existing yard-side line, run rigid pipe (no flex outdoors), install a shutoff valve at the BBQ end, and stub up where you want the connection. Most installs $325-$650 depending on distance from existing line and trenching needed if buried.
Does my generator need a gas line in Cedar Hills?
Standby generators (16-22 kW Generac, Kohler, Briggs) almost always run on natural gas in Cedar Hills (vs LPG/propane in rural areas). Most installs need: a 1" gas line tap, possibly upsizing the main from the meter, a dedicated regulator at the generator, and a transfer switch in the electrical panel. Combined plumbing + electrical work, we coordinate both. Total $4,200-$8,500 install for a typical home standby setup.
Do I need permits for gas line work in Cedar Hills?
Yes - any new gas line installation requires a permit from your Cedar Hills/county building department. Pure repairs (replacing a failed flex line, fixing a leak on existing pipe) typically don't need a permit. We pull permits on every new install as part of the quote and schedule the inspector signoff - you don't deal with it.
Gas Line Service in nearby Utah County cities
Other services we offer in Cedar Hills
Ready for your free Cedar Hills estimate?
We come to your home, do a real assessment, and give you a written, fixed-price quote — no obligation, no high-pressure sales.