Lighting Installation in Woods Cross, Utah
Free in-home estimate · Family-owned · Licensed & insured · 10+ years serving Utah
What homeowners in Woods Cross should know about lighting installation
Lighting work in Woods Cross covers a wide range — replacing dated brass fixtures with modern LED retrofits, adding recessed cans to a finished basement that came with one light per room, installing landscape lighting along the driveway and walking paths, hanging a chandelier in a 2-story entry, converting outdoor floods to motion-sensor LEDs, or wiring up a Lutron Caseta whole-home smart lighting system. Each one is its own scope. We're licensed Utah electricians, so any cut into drywall or new branch circuit work gets done to code, properly grounded, and (for new circuits) permitted with Woods Cross inspector signoff. Most single-fixture swaps run 1-2 hours; full-room can light retrofits 4-6 hours for 4-6 cans; landscape lighting systems 1-2 days depending on transformer count and run distances.
Why Woods Cross homeowners pick us for lighting installation
Licensed Utah electricians on every job - drywall cuts, new branch circuits, and grounding all to NEC code
Smart lighting integration - Lutron, Caseta, Hue, Kasa - we wire and configure full-home setups
LED retrofit and dimmer compatibility - we test every fixture for proper dimmer pairing before we leave
Lighting Installation FAQ — Woods Cross edition
How much does lighting installation cost in Woods Cross?
Common Woods Cross lighting work: single fixture swap (replace pendant/chandelier where wiring exists) $225-$385, recessed can lights installed in finished ceiling $145-$220 per can, ceiling fan install with wiring $325-$525, outdoor floodlight + motion sensor $285-$485, landscape lighting starter install (6-8 fixtures + transformer) $1,200-$1,800.
Can you add recessed cans without ripping out my Woods Cross ceiling drywall?
Yes - "old work" can install techniques cut 6"-diameter holes in the ceiling drywall and use spring-clip cans that mount through the hole. No drywall demo or repair needed. You see only the trim ring. We can fish wires through the joist space from a nearby junction box or run a new circuit if needed.
Why does my new LED dimmer flicker in my Woods Cross home?
Most common cause: incompatible dimmer for the bulb. Older dimmers were designed for incandescent and don't drive LED loads correctly. Modern LED-compatible dimmers (Lutron Caseta, Maestro, Diva LED+) solve this. We test every dimmer-bulb pairing at install before we leave - if it flickers, we replace the dimmer.
Can you install smart lighting in my Woods Cross home?
Yes - we install Lutron Caseta and RA2 (most popular), Philips Hue, Kasa, and Insteon. Caseta needs a bridge + hub but doesn't require a neutral wire (works in pre-1985 Woods Cross homes that often lack neutrals in switch boxes). We program scenes, schedules, and voice integration (Alexa, Google, HomeKit) as part of the install.
How long does landscape lighting installation take in Woods Cross?
Starter system (6-8 path lights, 1-2 spotlights, transformer): 1 day, 6-8 hours. Mid-size system (12-15 fixtures with controller): 1.5-2 days. Full estate-style install (25+ fixtures, multiple zones, smart controller): 2-3 days. We bury the wire below code-required depth and pull permits if your jurisdiction requires them.
Lighting Installation in nearby Davis County cities
Other services we offer in Woods Cross
Ready for your free Woods Cross estimate?
We come to your home, do a real assessment, and give you a written, fixed-price quote — no obligation, no high-pressure sales.